I checked with Draw-Tite and although the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75034 is not listed for models with the heavy duty suspension, the Ultra Frame Trailer Hitch Receiver part # 41947 is so this is what I recommend.
I also checked with Curt but there was no mention of fit on models with the heavy duty suspension. view full answer...
Yes, the Draw-Tite Trailer Hitch Receiver # DT45508 will fit on you 2001 Ford F-350 XL Super Duty. This will allow you to use either the 34" # RP45292 or 41" # RP45018 extension in the 2-1/2" Receiver.
Do remember you will need a Wiring Extension # TLW6042 as well to connect your trailers electrical connection. view full answer...
For a class V hitch on your 2022 Ford F-350 cab and chassis you are going to want the Draw-Tite Ultra Frame Trailer Hitch Receiver item # DT52MR. This hitch is custom fit and bolts directly to your Ford with included hardware. It has a 2" receiver and a maximum gross trailer weight of 18,000 lbs. The Curt Heavy Duty Forged Ball Mount for 2" Hitches - 5" Rise - 6" Drop - 17,000 lbs item # C45342 will work great with this hitch.
For a heavy duty ball mount that fits a 2-1/2" receiver and... view full answer...
I do have a solution, but the # C15800 will not fit your 2018 Coachmen Pursuit Precision Motorhome 27DS. For a heavy duty hitch you need the Curt Class 5 Universal Hitch # C87CR. This fits frames up to 44" and has the same high capacity with a 2-1/2" receiver. If you want a 2" receiver you can use the # 15902 instead. You will need to take the hitch to a certified welder for installation. view full answer...
The B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25182 will fit your 2006 GMC Sierra 2500HD if you have a 6-1/2' short bed. If you have an 8' long bed you will need their Receiver # BWHDRH25189 view full answer...
Since you're wanting heavy duty, the best hitch for your 2005 F-250 is going to be the TorkLift SuperHitch Original Trailer Hitch Receiver item # TLF1002. This hitch has plenty of capacity for your horse trailer with a 10,000 lbs gross towing weight. It has both a 2" and 2-5/16" receiver.
For a ball mount, you will want the B&W Tow & Stow 3-Ball Mount item # BWTS20049B. This ball mount will fit a 2-1/2" hitch receiver. It has a 18,000 lbs capacity and a 7" drop. It has a 1-7/8", 2", 2-5/16"... view full answer...
The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver # 38023 is a universal style hitch that is designed to be welded onto frames with a width of 33-1/2" to 34-1/2".
I recommend going with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30 that is custom fit for your 2002 Ford F-350 Super Duty. There is no drilling or welding required to install this receiver. The hitch has dual receivers, one 2-1/2" and the other is 2". An adapter sleeve is included to reduce the... view full answer...
All trailer hitches that fit your 1989 Ford F-350 are going to require drilling, and I also wanted to note that the Draw-Tite Ultra Frame Trailer Hitch # 41952 will not fit your truck; it is designed to fit mid-2010's Ram 3500-5500 cab and chassis.
All trailer hitches that do fir your '89 F-350 are going to require drilling, and for a hitch that fits your F-350, a heavy-duty option similar to the one you referenced is going to be from B&W, and will depend on if your '89 F-350 pick-up has... view full answer...
The only B&W trailer hitch receiver we have for your 2007 GMC Sierra New Body 1500 is the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25217. As long as you have the standard rear bumper and not the deep 10" drop bumper then this hitch will work well for you.
The B&W Heavy-Duty Trailer Hitch Receiver is a Class V hitch with a 2" receiver tube opening. It comes with all hardware and everything you will need for installation. I have attached an install video of this hitch on a similar... view full answer...
Yes, as noted in our fit guide the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 is only a fit for the cab and chassis models with 34 inch frames of 1991 Chevy truck.
Assuming you have a standard bumper, the correct trailer hitch for your 1991 Chevy is the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25124.
Please keep in mind the aforementioned hitch will not work if you have a Crew Cab. view full answer...
From what I was able to find on the Ambull Heavy Duty Hitch Receiver Shackle it uses a 7/8" pin to connect the D-Ring. I recommend measuring what you have to make sure this is correct. Without any other information on this product I'm not sure if there are variations that use a different pin, and cannot be sure of the size. You will also need to measure the span since that information is not available.
Assuming you find that it is in fact 7/8" in diameter and the span is no more than 3",... view full answer...
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs Item # C45341 is going to fit in the receiver the same as any ball mount. That is to say that the receiver opening is slightly larger than the ball mount shank so it can go in/out easily without binding up. There will be some movement but how much movement is acceptable is subjective to the individual. What is fine for one person might be too much for you.
You can limit movement by using an anti-rattle device... view full answer...
Yes, the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 referenced in your question will fit the 34 inch frame width on your 1977 Ford F-250. This was the common frame width on trucks during that time frame (along with most cab and chassis models of today) and this particular hitch fits that width perfectly.
This heavy-duty Class V hitch features a 16,000 pound towing weight capacity and a 1,600 pound tongue weight limit. I have attached a sample install video that you can check... view full answer...
First we will need to determine which style F-Series Super Duty your 1990 truck is. For a Cab and Chassis model you will need the Curt Trailer Hitch Receiver # C14082. For a Super Duty with Deep Drop rear bumper you will need the Curt Trailer Hitch Receiver # C15511. And Finally for the Super Duty with standard step bumper the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122. All 3 of these will require drilling into your frame for a non-weld installation. Each will require you to position... view full answer...
For your 2018 Nissan Titan XD, there is not a confirmed fit trailer hitch receiver meaning the manufacturer has not yet tested your vehicle for a fit. I reached out to my tech contact at Curt and also did some research and have found no changes in the frame from 2017 to 2018 so the Curt # C13317 or the heavy duty # C15306 should bolt right on with no drilling required. The heavy duty hitch will sit further below the bumper as it is designed to also be compatible with the factory hitch... view full answer...
The EZ Heavy Duty Adjustable Hitch with Combo Ball # AM3298 is comparable to the other ball mounts that you have mentioned. Any ball mount or shank on an accessory is made with a certain amount of tolerance in the size of the shank. The differences are so small you probably would not be able to tell the difference.
Shanks are made smaller than the receiver opening so that it is easy to insert and remove the accessory. The movement can be limited or in some cases eliminated using an anti... view full answer...
The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part # 3371801055 can be welded or bolted on. It does come with the hardware to bolt it on. The maximum gross trailer weight is 10,000 lbs. view full answer...
Yes, the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches # ERT00110 does require a 2-1/2" Ball Mount # BWBMHD30210 with at least 1" of space for the Hub # ERT057 to fit without any gussets. It will also fit with 2-1/2" adjustable ball mounts as long as you have the 1" space for the hub.
I recommend using a BOLT Trailer Hitch Receiver Lock # BL7023582 to secure the assembly in your receiver. This lock will key to your trucks ignition key so there is no need for carrying... view full answer...
Yes, the arms of your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches # ERT00108 will screw into the Replacement Hub for Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches # ERT057 allowing you to use it with your new truck. view full answer...
No but you can use a universal hitch as there are no custom fits. For a Class V hitch that you can bolt or weld onto your frame that is 42 inches from outside to outside you can use one from Draw-Tite:
- Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07
Or for a weld-on only you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. view full answer...
Go To Results